Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in East Boston?
Spring replacement in East Boston typically costs $210 – $400 for a single spring, and most jobs land near the middle of that range once the old spring is measured and matched. If your door runs two springs – and most two-car doors do – a matched pair is almost always replaced together, so budget roughly twice that: around $420 – $800 for the pair. The written estimate you get before any work starts is the final price.
Here’s the part most price guides skip: a spring isn’t a commodity part. Wire gauge, inside diameter, wound length and cycle rating all have to match the door’s weight and the number of times it opens each day. A cheap spring of the wrong spec will fail early, and you’ll pay twice. We measure yours, match it, and tell you which option actually fits your door.
Key Takeaways
- One torsion or extension spring: typically $210 – $400 installed.
- A matched pair, replaced together: about double, so roughly $420 – $800.
- Most spring jobs are quoted and finished in a single visit once the part is matched.
- Free estimates, and we’ll tell you whether repair or replacement makes more sense for your door.
- Call (877) 367-9149 to get an exact number for your door.
Spring Replacement Cost Breakdown (2026)
Spring work rarely arrives alone. When a spring lets go, the cables, bearings and rollers have usually taken a beating too. Here’s how the line items typically stack up in East Boston, so you can see where your money goes before anyone touches the door.
| Service | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $210 – $400 |
| Matched pair (both springs replaced together) | About double the single-spring range |
| Cable repair | $155 – $295 |
| Track realignment | $140 – $285 |
| Roller replacement | $130 – $260 |
| Panel replacement | $295 – $590 |
| Opener repair | $140 – $380 |
| Opener installation | $295 – $650 |
| General garage door repair | $175 – $710 |
| New door installation | $825 – $2595 |
These are typical ranges for the East Boston market in 2026, not quotes. What pushes a spring job toward the top of the range is usually a second spring that needs replacing at the same time, extension springs instead of torsion, corroded or bent winding hardware, or an opener that needs recalibrating after the counterbalance changes. What keeps it lower: a single torsion spring on a standard one-car door, hardware that’s still clean, and a door that’s already been maintained. The counterbalance gets reset and the door rebalanced as part of the job, so you’re paying for a door that lifts correctly, not just a part swap. For a closer look at the full repair process, see our page on spring replacement.
What Affects Spring Replacement Pricing in East Boston
- Torsion vs. extension springs. Torsion springs sit on a shaft above the door and are the common setup on newer doors; extension springs run along the sides on many older three-deckers and two-families around East Boston. The two types use different hardware and different safety setups, and that affects both parts and labor.
- One spring or two. Many modern doors use two torsion springs so the door still has some counterbalance if one breaks. When one fails on a two-spring door, replacing both together is the sensible call, which is why the pair costs about twice a single spring.
- Door weight and size. A wide double-car door carries heavier springs than a single. Bigger, heavier doors need higher-cycle springs, which cost more up front but hold up better over years of daily use.
- The shape of the existing hardware. If a spring breaks and takes a cable with it, or bends a track, that gets folded into the job. It’s also the moment to look at rollers and bearings, because the door is already apart.
- Access and parking. Tight East Boston streets and shared driveways mean the technician sometimes has to work in a narrow spot with limited room to set up. That doesn’t add much, but it’s part of why a city quote can differ a little from a suburban one.
- Brand and door type. A Clopay, Amarr, Wayne Dalton, Raynor or Craftsman door all use slightly different spring configurations, and knowing the make saves time and guesswork on the visit.
How Spring Replacement Works, and Why We Don’t Recommend DIY
Springs store a large amount of energy. That stored tension is what makes the door feel light, and it’s also what makes a spring the most dangerous part on the whole door. A torsion spring under load can cause serious injury if it’s unwound without the right winding bars and technique, and extension springs can whip if the safety cable isn’t set up right. We handle that part for a living and we still treat every spring with respect. If you’re a hands-on homeowner, the safe thing to check is whether the door feels heavy when you lift it by hand (with the opener disconnected), whether the door is level, and whether you can see a gap in the spring coil. Beyond that, leave the winding and cable work to a trained technician.
What a proper spring replacement looks like when we do it: we identify the door and its springs, measure wire size and length, match the replacement to the door’s weight and cycle needs, wind the new spring to the correct tension, then rebalance the door and test the opener’s safety reverse. If the opener is an older LiftMaster or Genie unit, we check that it’s set up for the new balance point before we call the job done.
How to Save on Spring Replacement in East Boston
There’s no coupon needed to keep the bill down; the savings come from decisions.
- Replace the pair together. If both springs are the same age, doing them at once costs less than two separate visits and avoids a second failure a few months later.
- Ask for a cycle upgrade. A higher-cycle spring costs a little more now but lasts longer, which works out cheaper per year of use on a door that opens every day.
- Get the estimate in writing. Free estimates mean you know the number before the work starts. Call (877) 367-9149 to book one.
- Bundle small fixes. If your rollers are noisy or a cable is frayed, having it handled during the spring job avoids a separate call-out.
- Don’t wait for a full break. A spring that’s visibly stretched or making a loud crack on opening is telling you something. Catching it before it fails usually means a simpler, cheaper job.
Repair or Replace: What We Recommend
We get asked this a lot, and the honest answer depends on the door, not the spring. If the door panels are sound, the tracks are straight, and the opener works, replacing the springs is almost always the right move – the door has plenty of life left. If the door itself is rusted through, the panels are cracked, or the opener is on its last legs, a full East Boston garage door repair assessment will tell you whether putting money into springs makes sense or whether a new door is the better spend. We’ll give you the straight answer either way, because a customer who trusts us comes back.
If the door is beyond saving, a new door installation typically runs $825 – $2595 depending on size and material. We work with Clopay, Amarr, Wayne Dalton, Raynor and other major makes, so you’re not limited to one style.
Why Brand Knowledge Keeps Your Cost Down
Spring work isn’t brand-specific in the way an opener is, but knowing the door changes the visit. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor systems, which means when we show up we already know the common spring setups, the opener’s calibration routine, and where the weak points tend to be. That saves diagnostic time and avoids the “we’ll have to come back with the right part” problem. Our technicians have up to 15 years of experience across these systems.
We also supply garage door parts directly, separate from a labor call. If you’re a DIYer handling a simpler fix and just need a roller, a cable, or a set of springs to spec, you can source them from us. That’s a service in its own right, not a sales pitch attached to a repair.
What to Expect on the Day
- Estimate first. We look at the door, identify the springs, and give you a written estimate before work begins.
- Measure and match. We confirm wire gauge, inside diameter and wound length so the new spring fits the door’s weight.
- Safe removal and install. The old spring comes off under control, the new one goes on and gets wound to the correct tension.
- Rebalance and test. The door is balanced, the opener is recalibrated, and the safety reverse is checked.
- Walkthrough. We show you what was done and flag anything worth watching.
Most spring replacements are straightforward enough to finish in a single visit once the correct part is in hand. If your door is a less common size or an unusual setup, we’ll tell you up front rather than leave you guessing.
FAQs – Spring Replacement Cost
How much does spring replacement cost in East Boston?
Typically $210 – $400 for one spring, and about double that, around $420 – $800, for a matched pair replaced together. The exact figure depends on spring type, door weight and whether any related hardware needs attention. Call (877) 367-9149 for a free estimate on your door.
Is it cheaper to repair or replace a garage door spring?
Repair is nearly always cheaper than replacing the door – a spring job runs $210 – $400 for one spring versus $825 – $2595 for a whole new door. Replacement only makes sense when the door panels, tracks or opener are also failing. Call (877) 367-9149 and we’ll tell you which one actually makes sense for your door.
Can you come today for a broken spring?
Often yes, depending on the schedule and the part needed. A broken spring usually means the door won’t open, so we treat it as a priority. Call (877) 367-9149 and we’ll give you the soonest available time.
Do I need to replace both springs at once?
Usually yes if they’re the same age. A pair costs about twice a single spring, roughly $420 – $800, and replacing both together avoids a second failure and a second visit. If one spring is clearly newer, we’ll tell you that too. Call (877) 367-9149 to talk it through.
How long do replacement springs last?
It depends on the cycle rating and how often the door opens. Standard springs are rated for a set number of cycles, and higher-cycle springs last longer for a bit more money up front. A door that opens several times a day wears springs faster than one used once or twice. Call (877) 367-9149 to ask which rating fits your use.
Why is my spring replacement quote higher than a neighbor’s?
Springs are matched to the specific door. A bigger, heavier door, a two-spring setup, or extension springs on an older East Boston two-family all change the parts and labor involved. A written estimate based on your actual door is the only number that matters. Call (877) 367-9149 for yours.
Get a Free Spring Replacement Estimate in East Boston
A broken spring leaves you stuck, and guessing at the price doesn’t help. We give you a written estimate before any work starts, match the right spring to your door, and handle the dangerous part safely. Whether it’s a single torsion spring, a matched pair, or a spring plus the cable and rollers that went with it, we’ll quote it clearly and tell you if a repair isn’t worth it. Call (877) 367-9149 for a free estimate – spring replacement is one of our core specialties, and we work on whatever brand is on your garage.
Pricing reflects the East Boston market as of 2026. East Boston Garage Door Repair offers free estimates – call (877) 367-9149.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Nathan Sullivan"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Erin Brooks"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Todd Bennett